?2000 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com sensitron semiconductor technical data data sheet 632, rev. c hermetic power s chottky rectifier low reverse leakage 175 oc operating temperature description: 60 volt, 15 amp, power schottky rectifier in a shd-1/1b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 60 volts maximum dc output current (w ith cathode ma intained @ t c =100 o c) i o 15 amps maximum nonrepetitive forward s urge current (t=8.3ms, sine) i fsm 280 amps maximum junction capacitance (v r =5v) c t 720 pf maximum thermal resistance (juncti on to mounting surface, cathode) r jc 1.70 c/w maximum operating and storage temperature range top/tstg -65 to + 175 c electrical characteristics characteristic maximum forward voltage drop, pulsed (i f = 15 amps) t j = 25 c t j = 125 c v f .74 .67 volts maximum reverse current (i r @ 60v piv) t j = 25 c t j = 125 c i r .40 30 ma SHD116223 SHD116223b
?2000 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com sensitron data sheet 632, rev. c mechanical dimensions : in inches / mm SHD116223 SHD116223b .090 (2.29) max alumina ring moly base (cathode) .060.010 ( 1.52.254 ) .015.002 (.381.051) .020.005 r (.508.127 ) .225.010 (5.71.254) .150.010 (3.81.254) .375.020 (9.52.508) .225.010 (5.71.254) .015.005 (.381.127) copper anode .225.010 (5.71.254) .075 (1.91) m ax a lum ina ring .225.010 (5.71.254) moly lid moly base shd-1b shd-1 0.0 0.2 0.4 0.6 0.8 forward voltage drop - v f (v) 10 -1 10 0 10 1 instantaneous forward current - i f (a) typical forward characteristics 125 c 25 c 0 102030405060 reverse voltage - v r (v) 10 -3 10 -2 10 -1 10 0 10 1 10 2 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 0 102030405060 reverse voltage - v r (v) 200 300 400 500 600 700 800 junction capacitance - c t (pf) typical junction capacitance
?2000 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com sensitron data sheet 632, rev. c SHD116223 SHD116223b disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
